cockpit, Furniture

Rear Seat Front Raised

Posted by Paul

I did not quite have enough time to glue the seat front down today, but I did sand the bog back down on the kerf glass and generally clean up the panel and bridgedeck ready for gluing. The panel is very easy to work on now that the kerfs have set and it can be released from the seat uprights and can free stand. The seat retained a bit of its shape by being screwed into place as seen in the photo, however it will need to be screwed back into place when glued to set in place.

seat front raised

Once the seat panel is glued down, coved and glassed I can start work on the seat tops, then on the seat backs.

You May Also Like