resin coat, Starboard Hull

Final Preparation for Resin

Posted by Paul

I spent an hour today applying the skirts to mask off the areas I don’t want to resin or highbuild. The only reason that I don’t want or need resin and highbuild on these sections is that they will be glassed later when the bridgedeck is attached to the chamfer and when the strip planked hull to deck curve is made at the top of the hull so there is no point in applying resin and highbuild now. After I had attached the skirts I gave the hull a final wipe down with a towel to remove the last remnants of dust ready for an early start tomorrow.

You May Also Like