Bogging, Building Logs, fixing mistakes, Starboard Hull

Filling Holes

Posted by Paul

After a great day catching a ferry across Broken Bay for lunch at Palm Beach (from Ettalong) I put in 2 hours in the afternoon scraping at the air bubbles, poorly adhered glass and holes to remove any suspect glass before filling them all with bog. I also filled any of those low spots that I mentioned earlier that were left (most were gone after I sanded a little further). So tomorrow or the day after I will sand these fills back and the hull will be ready for another wash down to prepare for the 2 coats of resin and the first of about 3 coats of high build. There is more sanding to come of course but the highbuild is easier to sand than the bog.

You May Also Like

Paul