With the shape of the cupboards decided on I made an mdf mold from the cardboard template. 4 mdf panels cut to shape make up the mold and because both sides are identical but mirror image, the one mold will make both
With the bathroom floor finally glassed down and the sump lid on I finally have the last sole glassed into the boat. I have been stepping gingerly over the dry fit bathroom floor and it squeaked and groaned as it moved
In the meantime, with the shower pretty much finished except for glassing that last panel in, then the fairing and painting of it, and of course the fitting of the shower rose and mixer tap, I moved onto the laundry
Where I left off I had just cut and dry fit the shower wall that sits at the inboard side of the hull and covers over the black holding tank. I have allowed for some plumbing to go behind the black tank, the gas line
Well what can I say in my defence? Not much really, I have been getting the boat work done but not logging it as often as I should be and I would be surprised if most readers are bothering with me anymore. But let me