I have started on the foredeck planking. Even though I have not yet sanded and glassed the inside of the inside bow panels, I figure they are not going to change shape so I can safely make the foredeck panel and sand
On Thursday I was invited to sail on Warren’s 40ft Crowther cat from Swansea (Lake Macquarie, NSW Central Coast) about 60 nautical miles down to Woy Woy, just north of Sydney. The forecast was for NE winds 10-15
I have not managed much work on the boat over the past 10 days. Just a few hours here and there. I guess with family obligations I don’t usually get much time on the build this time of year. I have started
I got an early start today with the intention of knocking off early. Also the shed is cooler in the mornings as the sun has not had a chance yet to cook the air inside, and it felt cool until I started sanding the panel
Another hot day today. When I first inspected this shed in February I must have done so on a cool day because I don’t remember it being a concern to me then, but this shed is much hotter than the last one, at
Last week my computer crashed, a fault with a ram chip corrupted windows and it had to be re imaged, which is new speak for vista needed to be re installed, but the repair guys had to wipe the hard drive clean first.
The bow section is much smaller than the sides of the entire hulls but they still take a while to plank. Not as many screws to drive in but more planks needed to fill a larger radius, and the inside of the bows change
Another stinking hot weekend, yesterday was not as hot but today was low 30’s and extremely humid, until the late afternoon summer storms hit. I rode the scooter in a t-shirt and shorts to the shed so I headed off
I have removed the peel ply from the forebeam and I am very happy with the finish. I know it still needs fairing but it already looks great. Unfortunately I did not have my camera with me today so I had to use my mobile
I had a light duties day today, the beam is still curing so I cant do much with it. I did remove some of the peel ply to see how it came out, I am quite happy. So I glued some duracore panels ready to strip them for